Worked examples

See how a review leaves an understandable record

Controlled examples show the method without presenting invented customer savings or accuracy claims. Focused on weld tracking software and weld progress control.

Published 2026-07-25Reviewed 2026-07-28the Piping Tools Limited research and editorial team

Illustrative worked example

The figures below demonstrate the calculation and disclosure format. They are not customer results, performance promises, or evidence of product accuracy.

Example DECISION CHECK

Measure	Baseline sample	Review sample	Limitation
welds reviewed	3	1	Example only
status gaps	4	1	Controlled worksheet value
inspection holds	5	2	Controlled worksheet value
repair loops	6	3	Controlled worksheet value
reporting minutes	7	4	Controlled worksheet value

A publishable case study should replace example values with a named method, sample dates, job type, reviewer, and permission to publish.

Collect a publishable case study (.csv)

01 · weld ID · welds reviewed

02 · location · status gaps

03 · completion state · inspection holds

04 · inspection requirement · repair loops

05 · result · reporting minutes

06 · repair · welds reviewed

07 · release · status gaps

08 · weld ID · inspection holds

09 · location · repair loops

10 · completion state · reporting minutes

11 · inspection requirement · welds reviewed

12 · result · status gaps

Scope · WeldTrack

What this guide covers: Evidence Library

This page is for field QA teams managing weld traceability working on Evidence Library. Use it as a practical part of weld tracking, traceability, progress, and inspection control.

Confirm the work that must stay current

For evidence library, check weld identity and location.

Name the people who review and release it

For evidence library, check completion state and inspection requirement.

Test the final handoff before changing tools

For evidence library, check result and repair.

Published by the Piping Tools Limited research and editorial team. Published 2026-07-25; reviewed 2026-07-28. External practitioner review is credited only when consent and scope are recorded. Coverage is limited to weld tracking software and weld progress control.